Security Ranger III Guía de usuario descargar pdf (Pagina 69)

ORION SE / ME Installation

The ORION SE/ME Installation screens are used for endpoint installation which includes setting the GPS, setting the meter

type size and unit of measure, and confirming that the endpoint is within range of a gateway. To access the installation

screens, tap ORION SE/ME Installation on the ORION ME main menu. Refer to page 47 if you need help.

Step 1 (Optional) Set the endpoint Lat/Long. If the handheld

has built-in GPS, the values display.

NOT: N Installation can be performed with or without

a GPS location.

Check the Manual Entry box if you want to manually

enter a GPS location.

Result: The Lat Long boxes are activated.

• Tap in the "Lat" box to enter the latitude.

• Tap in the "Long" box to enter the longitude.

Figure 117: Installation Step 1

Use the onscreen keyboard (see Figure 10

on page 11 ) or the handheld keypad to enter the

numbers.

NOT: N The minus sign and the decimal point on the

handheld keypad are on the last row of blue

keys. See Figure 98 on page 60 if you need

help.

Align the optical head of the IR cable with the endpoint

IR port and tap Initial Read.

Result: An initial read of the endpoint is performed and

Step 2 displays as shown in Figure 119.

Figure 118: Manual GPS entry

Step 2 If the endpoint settings are not already selected, tap Set Endpoint Properties.

Result: A screen displays with the meter type, size and unit of measure as shown in Figure 120.

Typically, the properties do not need to be changed. However, if the endpoint is being installed on a different

meter, tap Size & Type and Units to change the properties. Then tap the Program button to set the new

endpoint properties. Tap Cancel if you do not wish to make any changes.

Figure 119: Installation Step 2

Figure 120: Set endpoint properties

Installation & Operation Manual

Page 69 February 2013

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 123 124

Sin comentarios

Security Ranger III Guía de usuario Pagina 69