Security Ranger III Guía de usuario descargar pdf (Pagina 119)

Set the VersaProbe COM Port on the Handheld

1. Access the Main Menu in the ORION Field Application software on the handheld. If you need help, go to "Program

Startup" onpage9.

2. Select Utilities> Settings> Hardware. For additional information, refer to "VersaProbe Reads" onpage20.

3. Check the box "Versa Probe is Bluetooth" on the Hardware Settings screen.

4. Tap the VersaProbe button to display the COM port selection screen.

5. Tap to select the COM port assigned to the VersaProbe in the section titled "Set up the VersaProbe Bluetooth

Connection on the Handheld" on the previous page. Typically it will be COM 8.

6. Tap Save.

7. Tap Close twice to close the Settings screens and return to the Main Menu.

Initializing the VersaProbe Bluetooth Connection with the Handheld

IMPORTANT

Do not access the ORION Field Application software on the handheld until you perform steps 1 and 2.

1. Squeeze and hold the VersaProbe trigger.

2. When the message "RELEASE BUTTON NOW TO CONNECT" is displayed, release the trigger.

Result: The Bluetooth connection will initialize and you will hear a “ticking" sound.

3. Access the ORION Field Application software on the handheld. The ticking stops shortly after accessing Read Route

or selecting VersaProbe in Program & Quick Read.

NOT: N If there is no touch account in the route, the ticking does not stop.

4. Perform the read normally. If you need help, refer to "VersaProbe" onpage45.

Terminating the VersaProbe Bluetooth Connection

1. When you nish reading, exit the ORION Field Application software.

2. The Bluetooth Connection may disable automatically. If the VersaProbe begins ticking, press and release the trigger

to disable the connection.

Result: The display conrms the Bluetooth connection has ended, then goes blank.

Installation & Operation Manual

Page 119 February 2013

1 2 ... 114 115 116 117 118 119 120 121 122 123 124

Sin comentarios

Security Ranger III Guía de usuario Pagina 119