Security Ranger III Guía de usuario descargar pdf (Pagina 59)

Advanced IR Programming

After reading an ORION ME endpoint, tap the Advanced button on the ORION ME IR Programming screen to access more

information and commands.

Use the Advanced button to see the endpoint firmware version, date/time, GPS location and battery status, and/or to request

a Flow Rate Study.

NOT: N The Advanced button is available on both the ORION ME IR Programming screen and the ORION ME RF Quick

Read - Single screen and provides access to the functionality described below in Advanced Screen Fields and Buttons.

Figure 97: Advanced button

Figure 98: Advanced screen

Advanced Screen Fields and Buttons

Firmware Displays the firmware version of the selected endpoint. Read only field

Type Displays the encoder type. Read only field

Set GPS Location Tap to store the latitude/longitude settings for the endpoint if a GPS antenna

is present. Populates automatically with an onboard GPS or can be entered

manually.

Programmable

Set Date/Time Tap to set the endpoint date/time using the handheld date/time. Programmable

Get Battery Status Tap to see the number of days left on the endpoint battery. Programmable

Flow Rate Study The field to the right of the Start, Get, Save buttons displays the flow study

results. Scroll to see the flow study results.

Display field

• Start Tap to start a 7-day flow rate study. Programmable

• Get Tap to get the results from the flow rate study. Programmable

• Save Tap to save the flow rate study results. A screen displays showing where the file

is saved.

Programmable

NOT:N The endpoint firmware version is also available during route reading. Refer to "Requesting Firmware Manually"

onpage26.

Installation & Operation Manual

Page 59 February 2013

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 123 124

Sin comentarios

Security Ranger III Guía de usuario Pagina 59