Security Ranger III Guía de usuario descargar pdf (Pagina 66)

ORION ME Proling

ORION ME Profiling is used to extract IR or RF historical interval data from an ME or SE (in mobile mode) endpoint for viewing

in the ORION Profile Viewer software. A water endpoint stores 90 days of hourly readings or 22 days of readings taken at 15

minute intervals.

S/N Displays the serial number of the ORION ME endpoint.

IR / RF Extract profile data via IR or RF. Tap the box to select.

Days Selects the number of days for the profile. Available choices: 1, 7, 14, 30, 60, ALL (90).

Read Endpoint Tap to get the endpoint read.

IR Extraction

To access profile data for an ORION ME or SE (in mobile mode) endpoint using IR, follow these steps.

1. Tap the IR/RF box so IR displays.

2. With the IR cable connected to the handheld, align

the optical head with the endpoint IR port.

3. Tap Read Endpoint.

Result: The endpoint serial number displays in the S/N

eld.

4. Tap Get Data.

Result: Prole data for the endpoint is extracted. The

screen lls as shown in Figure 112 to conrm that the

data has been retrieved.

Figure 111: IR Profile with reading

5. Tap Save to save the le to the handheld.

Result: The Test Circle selection screen displays.

6. Tap to select the Test Circle Code for the encoder.

Result: The le is saved to the handheld with the serial number and the date and time of the save in the le name. The

Interval Data Saved conrmation screen displays as shown in the example in Figure 113.

Figure 112: Profile data extracted

Figure 113: Profile data saved

7. Tap Ok to close the Interval Data Saved screen.

ORION® Automated Meter Reading System for Trimble® Ranger 3

Page 66 February 2013

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 123 124

Sin comentarios

Security Ranger III Guía de usuario Pagina 66