Security Ranger III Manual de usuario descargar pdf (Pagina 29)

Historical Interval Data

The ORION Field Application software is capable of extracting historical profile data from an ORION Migratable endpoint at

the following intervals:

7 days (Week) 14 days (Two weeks) 30 days (One month) 60 days (Two months) All readings stored in the endpoint

(Shorter months include extra days of readings, up to 30) (Up to 90 days of hourly readings or 2160 reads)

This chart shows the number of readings collected for meters set at 60 minute (hourly) intervals and at 15 minute (quarter

hourly) intervals:

Available Prole Data

Extraction Intervals

Hourly Reads:

1 Read per Hour

24 Reads per Day

15 Minute Reads:

4 Reads per Hour

96 Reads per Day

7 days 168 reads (24 x 7) 672 (96 x 7)

14 days 336 reads (24 x 14) 1344 (96 x 14)

30 days 720 reads (24 x 30) 2160 (96 x 22.5)

60 days 1440 reads (24 x 60) 2160 (96 x 22.5)

All/90 days 2160 reads (24 x 90) 2160 reads (96 x 22.5)

OTE:N The ORION Migratable endpoint (or Fixed Network in mobile mode) is capable of holding up to 90 days of hourly

interval data, or 2160 hourly reads. If the account is set up to read every 15 minutes – 4 readings per hour –

the data extracted reflects four (4) readings per hour and reaches the maximum 2160 reads in 22.5 days

(90 days / 4 = 22.5 days).

Requesting Historical Interval Data Manually

If a work item was not assigned by the reading data management operator, you can manually initiate a request for the

historical interval data from the current ORION Migratable or Fixed Network (mobile mode) endpoint by performing the

following steps.

1. Tap the Work Items button on the account read

screen for an ORION ME account.

Result: The Work Items screen opens.

OTE:N If a work item is set to be performed

automatically, the message says “Assigned“

and the Collect button is inactive.

Figure 46: Historical Interval Data

WORK ITEMS

Page 29 October 2014 ORION® Field Application 4.0 for Trimble® Ranger 3 with ReadCenter®

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Sin comentarios

Security Ranger III Manual de usuario Pagina 29